bam

bam

structure

structure

Mohammad Zaman Kabir

Professor 

Department

Department of Civil & Enviromental Engineering


Journal Papers

1- 1:MOHAMMAD ZAMAN KABIR - 2:ATA HOJATKASHANI - , "Experimental Examination of Intact and CFRP Retrofitted RC Beams under Monotonic and High Cycle Fatigue Loading" , Majlesi Journal of Mechanical Engineering , Vol.6 , NO.3 , PP.63 _ 70 , 06 September2013
2- 1:ATA HOJATKASHANI - 2:MOHAMMAD ZAMAN KABIR - , "Experimental and Numerical investigation of stress distribution at interfacial zones of intact and CFRP retrofittited RC beams" , JOURNAL OF ENGINEERING TECHNOLOGY , Vol.30 , NO.1 , PP.8 _ 18 , 20 June2013

3- 1:?Amir Hossein Sangaki - 2:Abolhasan Vafaei - 3:MOHAMMAD ZAMAN KABIR - 4:Tayebeh Goli - , "Ductility of L and T shape connection of 3D wall under lateral and vertical loading" , Civil Engineering Sharif , Vol.29-2 , NO.1 , PP.129 _ 139 , 16 March2013

4- 1:Ata HojatKashani - 2:MOHAMMAD ZAMAN KABIR - , "Interfacial stress assessment at the cracked zones in CFRP retrofitted RC beams" , STRUCTURAL ENGINEERING AND MECHANICS , Vol.44 , NO.6 , PP.705 _ 733 , 25 December2012

5- 1:ATA HOJATKASHANI - 2:MOHAMMAD ZAMAN KABIR - , "Experimental examination of CFRP strengthened RC beams under high cycle fatigue loading" , INTERNATIONAL JOURNAL OF CIVIL ENGINEERING , Vol.10 , NO.4 , PP.1 _ 1 , 15 December2012

6- 1:MOHAMMAD ZAMAN KABIR - 2:ARSALAN KALALI - , "In-Plane Numerical Modelling of Strengthened Perforated Masonry Walls using FRP under Cyclic Loading" , Asian Journal of Civil Engineering (Building and Housing) , Vol.14 , NO.1 , PP.161 _ 179 , 09 May2012

7- 1:MOHAMMAD ZAMAN KABIR - 2:ERFAN SHAFEI - , "Plasticity Modeling of FRP-Confined Circular Reinforced Concrete ColumnsSubjected to Eccentric Axial Loading" , COMPOSITES PART B-ENGINEERING , Vol.- , NO.43 , PP.3497 _ 3506 , 03 April2012

8- 1:ARSALAN KALALI - 2:MOHAMMAD ZAMAN KABIR - , "Cyclic behavior of perforated masonry walls strengthened with glass fiber reinforced polymers" , SCIENTIA IRANICA TRANSACTION A-CIVIL ENGINEERING , Vol.20 , NO.1 , PP.134 _ 146 , 02 February2012

9- 1:ARSALAN KALALI - 2:MOHAMMAD ZAMAN KABIR - , "Experimental response of double-wythe masonry panels strengthened with glass fiber reinforced polymers subjected to diagonal compression tests" , ENGINEERING STRUCTURES , Vol.1 , NO.39 , PP.24 _ 37 , 18 January2012

10- 1:AMAN KARAMLOU - 2:MOHAMMAD ZAMAN KABIR - , "Experimental study of L-shaped slender R-ICF shear walls under cyclic lateral loading" , ENGINEERING STRUCTURES , Vol.36 , NO.0 , PP.134 _ 146 , 07 January2012

11- 1:ALIREZA ZOJAJI - 2:MOHAMMAD ZAMAN KABIR - , "Analytical approach for predicting full torsional behavior of reinforced concrete beams strengthened with FRP materials" , SCIENTIA IRANICA TRANSACTION A-CIVIL ENGINEERING , Vol.19 , NO.1 , PP.51 _ 63 , 05 January2012
12- 1:MOHAMMAD ZAMAN KABIR - 2:ALIREZA NAZARI - , "Enhancing Ultimate Compressive Strength of Notch Embedded Steel Cylinder using overwrap CFRP Patch" , APPLIED COMPOSITE MATERIALS , Vol.on line , NO.0 , PP.0 _ 0 , 16 December2011
13- 1:ERFAN SHAFEI - 2:MOHAMMAD ZAMAN KABIR - , "Dynamic Stability Optimization of Laminated Composite Plates under Combined Boundary Loading" , APPLIED COMPOSITE MATERIALS , Vol.on line , NO.0 , PP.1 _ 19 , 23 July2011
14- 1:ARSALAN KALALI - 2:MOHAMMAD ZAMAN KABIR - , "Determination of Linear Elastic Constant of Unreinforced Brick Walls in In-Plane and Out-of Plane Performance Based on Homogenization and Micromechanics Approach" , , Vol.45 , NO.2 , PP.203 _ 217 , 23 June2011
15- 1:MOHAMMAD ZAMAN KABIR - 2:ALIREZA NAZARI - , "The study of ultimate strength in notched cylinders subjected to axial compression" , JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH , Vol.0 , NO.67 , PP.1442 _ 1452 , 23 May2011
16- 1:MOHAMMAD ZAMAN KABIR - 2:ERFAN SHAFEI - , "Interactive Instabilities of Thin-Walled Laminated Composite Pultrusion Box Columns" , STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS , Vol.10 , NO.4 , PP.131 _ 140 , 02 December2010
17- 1:ARSALAN KALALI - 2:MOHAMMAD ZAMAN KABIR - , "Modeling of Unreinforced Brick Walls under In-plane Shear & Compression Loading" , STRUCTURAL ENGINEERING AND MECHANICS , Vol.36 , NO.3 , PP.247 _ 278 , 25 October2010
18- 1:MOHAMMAD ZAMAN KABIR - 2:ALIREZA NAZARI - , "Numerical study on reinforcing of thin walled cracked metal cylindrical columns using FRP patch" , SCIENTIA IRANICA TRANSACTION A-CIVIL ENGINEERING , Vol.17 , NO.5 , PP.407 _ 414 , 05 October2010
19- 1:MOHAMMAD ZAMAN KABIR - 2:?ALI EHSAN SEYF - , "Lateral-torsional buckling of retrofitted steel I-beams using FRP sheets" , SCIENTIA IRANICA TRANSACTION A-CIVIL ENGINEERING , Vol.17 , NO.4 , PP.262 _ 272 , 06 August2010
20- 1:MOHAMMAD ZAMAN KABIR - 2:SHAPOUR TAHOUNI - 3:MAJID SAFEHIAN - , "Experimental and numerical study of the seismic behavior of combined RC frame with sandwich panel or shear wall" , , Vol.12 , NO.3 , PP.31 _ 38 , 20 February2010
21- 1:MOHAMMAD ZAMAN KABIR - 2:REZA VASHEGHANI FARAHANI - , "experimental investigation of performance in L-shaped wall to wall corner connections of 3D panels subjected to lateral cyclic loading" , , Vol. , NO.33 , PP.0 _ 0 , 30 November2009
22- 1:MOHAMMAD ZAMAN KABIR - 2:MOHSEN ESHAGHIAN - , "Flexural upgrading of steel- concrete composite Girders using externally bonded CFRP reinforcement" , APPLIED COMPOSITE MATERIALS , Vol.17 , NO.17 , PP.209 _ 224 , 20 November2009
23- 1:MOHAMMAD ZAMAN KABIR - 2:ERFAN SHAFEI - , "Analytical and Numerical Study of FRP Retrofitted RC Beams Under Low Velocity Impact" , , Vol. , NO.5 , PP.0 _ 0 , 01 October2009
24- 1:OMID REZAYFAR - 2:MOHAMMAD ZAMAN KABIR - 3: - , "Shaking Table Test of a 1:2.35 Scale 4-Story Building Constructed With a 3D Panel System" , , Vol. , NO.3 , PP.0 _ 0 , 01 June2009
25- 1:MOHAMMAD ZAMAN KABIR - 2:ARSALAN KALALI - , "Investigation of Effective Length Factor Method in Satisfying Overall Stability of the Structural System" , , Vol.0 , NO.0 , PP.0 _ 0 , 21 December2008
26- 1:MOHAMMAD ZAMAN KABIR - 2:ARASH ROJHANI SHIRAZI - , "Optimum Design of Filament -Wound Laminated Conical Shells for Buckling Using the Penalty Function" , , Vol. , NO.3 , PP.0 _ 0 , 01 September2008
27- 1:MOHAMMAD ZAMAN KABIR - 2:ATA HOJATKASHANI - , "A Comparison Between Finite Element and Analytical Solutions of Interfacial Stress Distribution in a RC Beam Retrofitted With FRP Composites" , , Vol.0 , NO.0 , PP.0 _ 0 , 30 May2008
28- 1:OMID REZAYFAR - 2:MOHAMMAD ZAMAN KABIR - 3:MASOOD TARIBAKHSH - 4:AMIR TEHRANIAN - , "Dynamic behaviour of 3D-panel single-storey system using shaking table testing" , , Vol. , NO.30 , PP.0 _ 0 , 01 February2008
29- 1:MOHAMMAD ZAMAN KABIR - 2:OMID REZAYFAR - 3:MOHAMMAD REZA RAHBAR - , "Upgrading Flexural Performance of Prefabricated Sandwich Panels Under Vertical Loading" , , Vol. , NO.3 , PP.0 _ 0 , 01 January2007
30- 1:MOHAMMAD ZAMAN KABIR - 2:ALI REZA KARIMI KHOSHHAL - , "" , , Vol. , NO.9 , PP.0 _ 0 , 22 December2006
31- 1:OMID REZAYFAR - 2:MOHAMMAD ZAMAN KABIR - 3:MASOOD TARIBAKHSH - 4:AMIR TEHRANIAN - , "" , , Vol. , NO.5 , PP.0 _ 0 , 23 October2006
32- 1:DAVOOD POORVEIS - 2:MOHAMMAD ZAMAN KABIR - , "Buckling of Discretely Stringer- Stiffened Composite Cylindrical Shells Under Combined Axial Compression and External Pressure" , , Vol. , NO.2 , PP.0 _ 0 , 01 April2006
33- 1:MOHAMMAD ZAMAN KABIR - 2:ATA HOJATKASHANI - , "Distortional Buckling of Thin-Walled Open Section Beams" , , Vol. , NO.5 , PP.0 _ 0 , 01 February2006
34- 1:MOHAMMAD ZAMAN KABIR - , "Structural Performance of 3-D Sandwich Panels Under Shear and Flexural Loading" , , Vol. , NO.1 , PP.0 _ 0 , 01 October2005
35- 1:MOHAMMAD ZAMAN KABIR - 2:DAVOOD POORVEIS - , "Stability Analysis of Laminated Cylindrical Shells under Combined Axial Compression and Non-Uniform External Pressure" , , Vol. , NO.3 , PP.0 _ 0 , 01 September2005
36- 1:DAVOOD POORVEIS - 2:MOHAMMAD ZAMAN KABIR - , "" , , Vol. , NO.3 , PP.0 _ 0 , 23 August2005
37- 1:MOHAMMAD ZAMAN KABIR - 2:AFSHIN MOSLEHI TABAR - , "Elastic Post -Buckling Stiffness of Rectangular Frames Using Perturbation Technique" , , Vol.0 , NO.0 , PP.0 _ 0 , 01 May2005
38- 1:MOHAMMAD ZAMAN KABIR - 2:AFSHIN MOSLEHI TABAR - , "Non-linear elastic stability of rectangular frames under various loading" , , Vol. , NO.1 , PP.0 _ 0 , 30 October2004
39- 1:MOHAMMAD ZAMAN KABIR - 2:MOHAMMAD REZA RAHBAR - , "" , , Vol. , NO.2 , PP.0 _ 0 , 21 June2004
40- 1:MOHAMMAD ZAMAN KABIR - 2:HOSSEIN NAGHAEI - , "" , , Vol.0 , NO.0 , PP.0 _ 0 , 22 June2002
41- 1:MOHAMMAD ZAMAN KABIR - , "Finite element analysis of composite pressure vessels" , , Vol. , NO. , PP.0 _ 0 , 30 July2000
42- 1:MOHAMMAD ZAMAN KABIR - , "Shear strain effects on flexure and torsion of thin_walled pultruded composite beams" , , Vol. , NO. , PP.0 _ 0 , 28 December1999
43- 1:MOHAMMAD ZAMAN KABIR - 2:archibald N.Sherbourne - , "local buckling of thin_walled fibre composite beams under transverse loading" , , Vol. , NO.26 , PP.0 _ 0 , 01 February1999
44- 1:MOHAMMAD ZAMAN KABIR - 2:archibald N.Sherbourne - , "Lateral _ torsional buckling of post _ local buckled fibrous composite beams" , , Vol. , NO.7 , PP.0 _ 0 , 01 July1998
45- 1:MOHAMMAD ZAMAN KABIR - 2:archibald N.Sherbourne - , "Shear strain effect in latear" , , Vol. , NO.5 , PP.0 _ 0 , 01 May1998
46- 1:MOHAMMAD ZAMAN KABIR - , "Optimal fibre orientation in lateral stability of laminated channel section beams" , , Vol. , NO. , PP.0 _ 0 , 01 January1998
47- 1:MOHAMMAD ZAMAN KABIR - , "Local buckling of fibre composite beams under stress gradient" , , Vol. , NO.1 , PP.0 _ 0 , 01 January1998
48- 1:MOHAMMAD ZAMAN KABIR - , "optimal orientation" , , Vol. , NO. , PP.0 _ 0 , 01 January1997
49- 1:MOHAMMAD ZAMAN KABIR - , "Flexaral tarsinel stabilit" , , Vol. , NO.3 , PP.0 _ 0 , 01 January1995


Conference Papers

1- 1:MOHAMMADAMIN SHAHMOHAMMADI - 2:MOHAMMAD ZAMAN KABIR - , "Considering the nonlinear stability of functionally graded composites (FGC) under uniform internal and external pressure" , 2nd National conference on new material and structures , Iran (Islamic Republic of) , 27 February2014 _ 28 February2014

2- 1:MOHAMMAD ZAMAN KABIR - 2:SEYYED MOHAMMAD MOJTABAIE - , "Seismic Performance of Innovative Flexural Bolted Connection of Portal Steel Frame of Cold Formed Members" , 2th National conference on Materials and innovative structures in Civil Engineering , Iran (Islamic Republic of) , 27 February2014 _ 28 February2014
3- 1:ERFAN SHAFEI - 2:MOHAMMAD ZAMAN KABIR - , "Response spectrum features of shear strengthened concrete beams under impact loading" , The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics , Iran (Islamic Republic of) , 18 February2014 _ 19 February2014
4- 1:MOHAMMAD ZAMAN KABIR - 2:ALIREZA NAZARI - , "?Experimental Measurements and Finite Element Characterization of hyperelastic Behavior in Elastomeric EVA Foam under uniaxial loading" , The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics ) , Iran (Islamic Republic of) , 18 February2014 _ 19 February2014
5- 1:MOHAMMAD ZAMAN KABIR - 2:ALIREZA NAZARI - 3:HOSSEIN HOSSEINI TOUDESHKY - , "Damage Progression Characterization of GFRP composite Plates by 3D FE Modeling in Various Loading Conditions" , The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics , Iran (Islamic Republic of) , 18 February2014 _ 19 February2014

6- 1:YOUNES ALIZADEH VAGHASLOO - 2:ALIREZA NAZARI - 3:MOHAMMAD ZAMAN KABIR - , "Investigation Of Load bearing behavior in composite sandwich 3pb beams with elastomeric foam core" , The Bi-Annual International conference on experimental solid mechanics and Dynamics (X-Mesh-2014) , Iran (Islamic Republic of) , 18 February2014 _ 19 February2014
7- 1:YOUNES ALIZADEH VAGHASLOO - 2:ALIREZA NAZARI - 3:MOHAMMAD ZAMAN KABIR - , "Investigation of Load bearing behavior in composite sandwich 3PB beams with elastomeric foam core" , The Bi-Annual International Conference on Experimental Solid Mechanics and Dynamics , Iran (Islamic Republic of) , 18 February2014 _ 19 February2014

8- 1:SHOHREH ALEDINI - 1:MOHAMMAD ZAMAN KABIR - , "seismic evaluation of FRP strengthened RC frame subjected to cyclic loading" , The 5th International Conference on Structural Analysis of Advanced Materials(ICSAAM 2013 ) , Greece , 23 September2013 _ 26 September2013
9- 1:MOHAMMAD ZAMAN KABIR - 1:SHOHREH ALEDINI - , "Application of Nanotechnology andNanomaterials in civil Engineering" , The 5th International Conference on Structural Analysis of Advanced Materials(ICSAAM 2013 ) , Greece , 23 September2013 _ 26 September2013
10- 1:MOHAMMAD ZAMAN KABIR - 2:ERFAN SHAFEI - , "Modeling of shear failure type RC beams strengthened with FRP composite Laminates subjected to low velocity impact" , 17th International Conference on Composite Structures , Portugal , 17 June2013 _ 21 June2013
11- 1:GHAZALEH ESLAMI - 2:MOHAMMAD ZAMAN KABIR - , "Multi objective optimization of orthogonally stiffened cylindrical shells subjected to non uniform external pressure" , 21th Annual International Conference on Mechanical Engineering , Iran (Islamic Republic of) , 07 May2013 _ 09 May2013
12- 1:MOHAMMAD ZAMAN KABIR - 2:MEHDI PARVIZI - 3:ARASH ASKARI - , "Determination of residual stresses and strains in cold-formed steel members due to roll forming process" , 21th annual international conference on mechanical engineering , Iran (Islamic Republic of) , 07 May2013 _ 09 May2013
13- 1:MOHAMMAD ZAMAN KABIR - 2:SHOHREH ALEDINI - , "The influence of externally bonded FRP on performance and failure mechanism of 3D RC beam-column connection under combined axial and cyclic loading" , 4th international conference on concrete and development , Iran (Islamic Republic of) , 29 April2013 _ 01 May2013
14- 1:MOHAMMAD ZAMAN KABIR - 2:HADI HEJABI - , "Experimental investigation of strengthened RC portal frame under combined cloading" , 4th international conference on concrete and development , Iran (Islamic Republic of) , 29 April2013 _ 01 May2013
15- 1:MEHDI TAHERZADEH ESFAHANI - 2:MOHAMMAD ZAMAN KABIR - 3:HAMID REZA OVESY - , "Local buckling of initially delaminated composite columns, using first order shear deformation theory" , The 3th International Conference on Composite Charaterization, Fabrication and Application CCFA-3 , Iran (Islamic Republic of) , 18 December2012 _ 19 December2012
16- 1:MOHAMMAD ZAMAN KABIR - 2:MEHDI MOTALEB - , "Numerical flexural investigation of damaged steel concrete composite girders repaired by CFRP plates" , The 3th International Conference on Composite Charaterization, Fabrication and Application CCFA-3 , Iran (Islamic Republic of) , 18 December2012 _ 19 December2012
17- 1:MOHAMMAD ZAMAN KABIR - 2:HADI HEJABI - , "Experimental investigation of GFRP strengthened RC portal frame under combined loading" , The 3th International Conference on Composite Charaterization, Fabrication and Application CCFA-3 , Iran (Islamic Republic of) , 18 December2012 _ 19 December2012
18- 1:MOHAMMAD ZAMAN KABIR - 2:ARSALAN KALALI - 3:REZA SHAHMORADI - , "Cyclic behavior of perforated masonry walls strengthened with fiber reinforced polymers" , 15th world conference on earthquake engineering , Portugal , 24 September2012 _ 28 September2012
19- 1:HOSSEIN HOSSEINI TOUDESHKY - 2:ALIREZA NAZARI - 3:MOHAMMAD ZAMAN KABIR - , "Repair of Delaminated Composite Beams using FRP Jacket under Fatigue Loading Conditions" , 9th International Congress on Civil Engineering , Iran (Islamic Republic of) , 08 May2012 _ 10 May2012
20- 1:MOHAMMAD ZAMAN KABIR - 2:MEHDI MOTALEB - , "Optimum Strengthening of Steel-Concrete Composite Beams using Pre-Stressed FRP Plates" , 9th International Congress on Civil Engineering , Iran (Islamic Republic of) , 08 May2012 _ 10 May2012
21- 1:MOHAMMAD ZAMAN KABIR - 2:Ahmad Reza Jafari - , "Numerical study on LAteral Torsional Buckling of Girders containing opening in web" , 9th International Congress on Civil Engineering , Iran (Islamic Republic of) , 08 May2012 _ 10 May2012
22- 1:HOSSEIN MOMENILARIMI - 2:MOHAMMAD ZAMAN KABIR - , "Study on shear strengthening of RC beams with Near surface mounted method using FRP composite sheets" , 9th International Congress on Civil Engineering , Iran (Islamic Republic of) , 08 May2012 _ 10 May2012
23- 1:MOHAMMAD ZAMAN KABIR - 2:ALIREZA NAZARI - , "Experimental study on the compressive load carrying capacity of FRP wrapped steel cylinders" , The International Conference on Experimental Solid Mechanics and Dynamics , Iran (Islamic Republic of) , 06 March2012 _ 07 March2012
24- 1:MOHAMMAD ZAMAN KABIR - 2:ATA HOJATKASHANI - , "Experimental investigation of CFRP strengthened RC beams under monotonic and fatigue loading" , The international conference on experimental solid mechanics and dynamics , Iran (Islamic Republic of) , 06 March2012 _ 07 March2012
25- 1:MOHAMMAD ZAMAN KABIR - 2:PARISA SHADAN - , "Seismic Performance of 3D Panel wall on Piloti RC Frame using Shaking Table Equipment" , 8th International Conference on Structural Dynamics , Belgium , 04 July2011 _ 06 July2011
26- 1:MOHAMMAD ZAMAN KABIR - 2:PARISA SHADAN - 3:Fariba Shadan - , "Enhancing the seismic performance of 3D panel wall on piloti frame using FRP laminated" , 6th International Conference on Seismology and Earthquake Engineering , Iran (Islamic Republic of) , 16 May2011 _ 18 May2011
27- 1:MOHAMMAD ZAMAN KABIR - 2:HASSEIN KOLAHI - , "Optimum Design of Girders with corrugated web" , 6th National Congress of Civil Engineering , Iran (Islamic Republic of) , 26 April2011 _ 27 April2011
28- 1:MOHAMMAD ZAMAN KABIR - 2:ERFAN SHAFEI - , "Flutter & Divergence Based Optimization of Laminated Composite Plates under Combined Loadings" , The Second International Conference on Composites: Characterization, Fabrication and Application , Iran (Islamic Republic of) , 27 December2010 _ 30 December2010
29- 1:MOHAMMAD ZAMAN KABIR - 2:?ALI EHSAN SEYF - , "Inter-laminar stress consideration of lateral-torsional buckling of FRP-retrofitted steel-beam using first order shear deformation" , The Second International Conference on Composites: Characterization, Fabrication and Application , Iran (Islamic Republic of) , 27 December2010 _ 30 December2010
30- 1:MOHAMMAD ZAMAN KABIR - 2:HAMED ZAD MEHR - , "Numerical investigation of micro-buckling failure mode in composite materials" , The Second International Conference on Composites: Characterization, Fabrication and Application , Iran (Islamic Republic of) , 27 December2010 _ 30 December2010
31- 1:MOHAMMAD ZAMAN KABIR - 2:?ALI EHSAN SEYF - , "Lateral torsional buckling of steel I-beam retrofitted using FRP sheets: analytical solution and optimization" , The 5th International Conference on FRP Composites in Civil Engineering-CICE 2010 , China , 27 September2010 _ 29 September2010
32- 1:MOHAMMAD ZAMAN KABIR - 2:ATA HOJATKASHANI - , "Examination of interfacial stresses due to crack propagation in FRP retrofitted RC beams" , The 5th International Conference on FRP Composites in Civil Engineering- CICE 2010 , China , 27 September2010 _ 29 September2010
33- 1:HAMID REZA KAZEMI NIA KORRANI - 2:MOHAMMAD ZAMAN KABIR - , "?Comparison on Lateral Torsional Buckling mode between Honey comb Girders and I sections" , 5th National congress on Civil Engineering , Iran (Islamic Republic of) , 04 May2010 _ 06 May2010
34- 1:MOHAMMAD ZAMAN KABIR - 2:ATA HOJATKASHANI - , "On the examination of the CFRP retrofitted RC beams at the critical region under fatigue loading" , IMS/4 International conference on the application of traditional and high performance materials in harsh , United Arab Emirates , 24 March2010 _ 25 March2010
35- 1:MOHAMMAD ZAMAN KABIR - 2:ALIREZA NAZARI - , "Experimental investigation on repair of cracked steel cylinder under compression loading using FRP materials" , IMS/4 International conference on the application of traditional and high performance materials in harsh environment , United Arab Emirates , 24 March2010 _ 25 March2010
36- 1:MOHAMMAD ZAMAN KABIR - 2:ALIREZA NAZARI - , "Reinforcement of plastes with various aspect ratios against eleastic axial buckling using externally bonded FRP patches" , , Iran (Islamic Republic of) , 12 May2009 _ 13 May2009
37- 1:MOHAMMAD ZAMAN KABIR - 2:AMIR HOMAYOON KOSARIEH - , "The effects of stiffness alteration of the first floor in concrete precast 3D panel system supported on RC frames on its seismic responses" , 8th International Congress on Civil Engineering , Iran (Islamic Republic of) , 11 May2009 _ 13 May2009
38- 1:MOHAMMAD ZAMAN KABIR - 2:AMIR HOMAYOON KOSARIEH - , "The effects of steel amount of the concrete precast 3D panel welded wire frame on their nonlinear and seismic behaviors" , 8th Int. Congress on Civil Engineering , Iran (Islamic Republic of) , 11 May2009 _ 13 May2009
39- 1:RAMIN MAHMOODZADE ANDVARI - 2:MOHAMMAD ZAMAN KABIR - , "Performance Factor estimation of steel non-stiffened shear wall" , 8th International Congress on Civil Engineering , Iran (Islamic Republic of) , 11 May2009 _ 13 May2009
40- 1:MOHAMMAD ZAMAN KABIR - 2:ALIREZA NAZARI - , "Reinforcement of Plates with various Aspect Ratios against Elastic Axial Buckling using Externally bonded FRP Patches" , 8th International conference on Civil Engineering , Iran (Islamic Republic of) , 11 May2009 _ 13 May2009
41- 1:MOHAMMAD ZAMAN KABIR - 2:RAMIN MAHMOODZADE ANDVARI - , "Study of cyclic behavior of steel shear wall" , 8th International Congress on Civil Engineering , Iran (Islamic Republic of) , 11 May2009 _ 13 May2009
42- 1:MOHAMMAD ZAMAN KABIR - , "Flexural upgrading of steel concrete composite girders using externally bonded CFRP reinforcement" , , Iran (Islamic Republic of) , 15 December2008 _ 18 December2008
43- 1:MOHAMMAD ZAMAN KABIR - , "Enhancing of stability capacity of thin metal plates using bonded composite patch" , , Iran (Islamic Republic of) , 15 December2008 _ 18 December2008
44- 1:MOHAMMAD ZAMAN KABIR - , "Inelastic seismic performance of concrete precast 3D panel system with discontinuous shear walls supported on RC frames" , , China , 12 October2008 _ 17 October2008
45- 1:MOHAMMAD ZAMAN KABIR - , "Structural perfomance of retrofitting bridge deck slabs using CFRP strips under cycleic loading" , , China , 12 October2008 _ 17 October2008
46- 1:MOHAMMAD ZAMAN KABIR - 2:ALI MANSOORI - , "Numerical investigation of the behavior of FRP wrapped RC slender columns under eccentric loading" , , Canada , 22 September2008 _ 24 September2008
47- 1:MOHAMMAD ZAMAN KABIR - 2:HAMID YADOLLAHI OMRAN - , "Study of RC beams strengthened in flexure with near surface mounted CFRP strips by numerical and analytical modeling" , , Canada , 22 September2008 _ 24 September2008
48- 1:MOHAMMAD ZAMAN KABIR - , "Numerical investigation of strengthening twoway concrete slabs with FRP strips subjected to transverse loading" , , Cyprus , 15 September2008 _ 17 September2008
49- 1:MOHAMMAD ZAMAN KABIR - 2:HAMID YADOLLAHI OMRAN - , "Numerical and analytical modeling of RC beams strengthened in flexure with near surface mounted CFRP strips" , 4th National congress on Civil Engineering , Iran (Islamic Republic of) , 06 May2008 _ 08 May2008
50- 1:HAMID YADOLLAHI OMRAN - 2:MOHAMMAD ZAMAN KABIR - , "Cost optimization of composite floor using I shape steel girders" , 4th National Congress on Civil Engineering , Iran (Islamic Republic of) , 06 May2008 _ 08 May2008
51- 1:MOHAMMAD ZAMAN KABIR - 2: - , "Evaluation of the accuracy of white light PIV technique for flow velocity measurement" , , Malta , 18 September2007 _ 21 September2007
52- 1:MASOOD TARIBAKHSH - 2:MOHAMMAD ZAMAN KABIR - 3:OMID REZAYFAR - , "" , , Iran (Islamic Republic of) , 25 December2006 _ 26 December2006
53- 1:MOHAMMAD ZAMAN KABIR - , "Numerical study of single story building constructed using 3D panel prefabricated system under seismic ground motions" , , Swaziland , 03 September2006 _ 08 September2006
54- 1:MOHAMMAD ZAMAN KABIR - , "An investigation on ductility of RC frame in filled with un- reinforced masonry wall subjected to cyc" , , Swaziland , 03 September2006 _ 08 September2006
55- 1:MOHAMMAD ZAMAN KABIR - , "Shaking table test of full- scale single story building of 3D - panel prefabricated system" , , Swaziland , 03 September2006 _ 08 September2006
56- 1:MOHAMMAD ZAMAN KABIR - 2:SAID REZA SHAHMORADI - 3:OMID REZAYFAR - , "Non-linear response of experimental and numerical modelling of combined system, 3D wall panel and bending RC frame, subjected to seismic loading" , , Thailand , 03 August2006 _ 05 August2006
57- 1:MOHAMMAD ZAMAN KABIR - 2:OMID REZAYFAR - 3:MASOOD TARIBAKHSH - 4:AMIR TEHRANIAN - , "Shaking table test of full scale single storey building of 3D panel prefabricated system" , , Canada , 23 May2006 _ 26 May2006
58- 1:MOHAMMAD ZAMAN KABIR - 2:OMID REZAYFAR - 3:MASOOD TARIBAKHSH - 4:AMIR TEHRANIAN - , "Stude of seismic performance of building constructed in 3D panel pre-fabricated system using shaking table" , , Iran (Islamic Republic of) , 24 April2006 _ 26 April2006
59- 1:MOHAMMAD ZAMAN KABIR - , "Experimental relation between non destructive test and standard cylinder in shotcrete used in bearing 3D wall panels" , , Canada , 21 September2005 _ 24 September2005
60- 1:MOHAMMAD ZAMAN KABIR - , "Experimental and numerical investigation of combined system,3d wall panels and bending frame subjected to cyclic loading." , , Canada , 02 June2005 _ 05 June2005
61- 1:MOHAMMAD ZAMAN KABIR - , "Non _ linear response of combined system,3D wall panels and bearing steel frame subjected to seismic loading." , , Greece , 29 May2005 _ 31 May2005
62- 1:ALIREZA RAHAI - 2:MOHAMMAD ZAMAN KABIR - 3:YAHYA NASSIRA - , "" , , Iran (Islamic Republic of) , 30 April2005 _ 02 May2005
63- 1:MOHAMMAD ZAMAN KABIR - , "experimental and numerical investigation of combined system 30 wall panels and bending frame subjected to cyclic loading" , , Canada , 21 March2005 _ 21 March2005
64- 1:MOHAMMAD ZAMAN KABIR - 2:ALI REZA KARIMI KHOSHHAL - , "Upgradieg shear resistance of deep rc beams with composite fibrics" , , Canada , 20 July2004 _ 22 July2004
65- 1:MOHAMMAD ZAMAN KABIR - 2:DAVOOD POORVEIS - , "stability Analysis of circumferentially stiffened tamirated cylindrical shells under combined axial and external pressure" , , United Kingdom , 22 June2004 _ 24 June2004
66- 1:MOHAMMAD ZAMAN KABIR - 2:OMID REZAYFAR - , "non _ linear dynamic behavior of combined system on rc frame precast 3d wall panels with irregularities in vertical stiffness" , , Canada , 01 March2004 _ 01 June2004
67- 1:MOHAMMAD ZAMAN KABIR - 2:MEHDI POURSHA - , "" , , Iran (Islamic Republic of) , 10 December2003 _ 11 December2003
68- 1:MOHAMMAD ZAMAN KABIR - 2: - 3:ALIREZA RAHBAR - , "An Estimation of Ductility and Behaviour Factor of 3D Sandwich Panels Subjected to Shear Loading." , , Italy , 22 September2003 _ 23 September2003
69- 1:MOHAMMAD ZAMAN KABIR - 2: - , "" , , Iran (Islamic Republic of) , 25 February2003 _ 26 February2003
70- 1:MOHAMMAD ZAMAN KABIR - 2:HOSSEIN JAFARZADEH - , "" , , Iran (Islamic Republic of) , 25 February2003 _ 26 February2003
71- 1:MOHAMMAD ZAMAN KABIR - 2:HASSAN NADALI - 3:OMID REZAYFAR - , "" , , Iran (Islamic Republic of) , 20 February2003 _ 20 February2003
72- 1:MOHAMMAD ZAMAN KABIR - 2:SAMAN HEDJAZI - , "" , , Iran (Islamic Republic of) , 20 February2003 _ 20 February2003
73- 1:MOHAMMAD ZAMAN KABIR - 2:DAVOOD POORVEIS - 3: - , "Stability Analysis of Stiffened Laminated Cylindrical Shells Under Combined Axial and external loads ." , , Iran (Islamic Republic of) , 25 January2003 _ 27 January2003
74- 1:MOHAMMAD ZAMAN KABIR - 2:HAMIDREZA ASHRAFI - 3:MOHSEN NAJIMI VARZANEH - , "Mechanical properties of 3D wall panels under shear and flexural loading" , , Canada , 04 June2002 _ 09 June2002
75- 1:MOHAMMAD ZAMAN KABIR - 2:HAMIDREZA ASHRAFI - 3:MOHSEN NAJIMI VARZANEH - , "upgrading dactilty of rc beam _ column connetion with high per fer mance 4rp" , , Spain , 01 March2002 _ 04 March2002
76- 1:MOHAMMAD ZAMAN KABIR - 2:ALI REZA TAGHAVEE KANEE - , "Non _ linear Behavior of thin _ walled cylindrical shells with lateral open ...." , , Iran (Islamic Republic of) , 10 August2001 _ 16 August2001
77- 1:MOHAMMAD ZAMAN KABIR - 2:SAMAN HEDJAZI - 3:MOHAMMAD REZA RAHBAR - , "" , , Iran (Islamic Republic of) , 30 April2001 _ 02 May2001
78- 1:MOHAMMAD ZAMAN KABIR - 2:SAYYAD HOSSEIN MOOSAVI - , "Non linear behanior of thin walled open section composite beams in lateral stability" , , Italy , 12 September2000 _ 14 September2000
79- 1:MOHAMMAD ZAMAN KABIR - 2:MOHAMMD ALI POURAKGTARIEH - , "OPTIMAL FIBRE ORIENTATIONS ON POSTBUCKLING STIFFNESS OF RECTANGULAR LAMINATED COMPOSITE PLATES" , , Iran (Islamic Republic of) , 16 May2000 _ 19 May2000
80- 1:MOHAMMAD ZAMAN KABIR - 2:AFSHIN BAGERZADEH - , "" , , Iran (Islamic Republic of) , 20 April2000 _ 20 April2000
81- 1:MOHAMMAD ZAMAN KABIR - 2:SAYYAD HOSSEIN MOOSAVI - , "interactive buckling of: I- section composite beams" , , Australia , 08 December1997 _ 11 December1997
82- 1:MOHAMMAD ZAMAN KABIR - , "interactive buckling in fibrous pultruded: I-Section composite beams" , , Canada , 01 January1997 _ 01 January1997
83- 1:MOHAMMAD ZAMAN KABIR - , "A finite element prescutation of an optimum design for filament winding compnsite pressure vessels" , , Canada , 01 January1997 _ 01 January1997
84- 1:MOHAMMAD ZAMAN KABIR - , "Interactive bucking in composite: I beams:" , , Canada , 01 January1996 _ 01 January1996
85- 1:MOHAMMAD ZAMAN KABIR - , "" , , Canada , 01 January1996 _ 01 January1996
86- 1:MOHAMMAD ZAMAN KABIR - , "Computer analysis of filament over wrapped metalic pressure vessels with an optimun head shape" , , Canada , _


Projects

 1-   "Numerical & experimental study on stability of thin _ walled cylindrical shells containing stiffened opening under axial pressure ." , 1:MOHAMMAD ZAMAN KABIR - 3:AMIR RISMANDOUST - , 21 November 2000 _ 02 January 2005


Books

  1-   1:MOHAMMAD ZAMAN KABIR - 2: - , , Edition : 1 , Iran (Islamic Republic of) , 22 September2008


Inventions

  1-   1:ALIREZA NAZARI - 2:MOHAMMAD ZAMAN KABIR - , "" , Iran (Islamic Republic of) , 100300810 , 13 April2009 _ 13 April2011


Graduate Students Projects

1- MOHAMMAD NAVI , MOHAMMAD ZAMAN KABIR , , "Buckling and post-buckling analysis of cracked FGM plates under mechanical loadings" , Msc , 05 July2014

2- ERFAN SHAFEI , MOHAMMAD ZAMAN KABIR , , "" , Phd , 24 November2013
3- SEYYED MOHAMMAD MOJTABAIE , MOHAMMAD ZAMAN KABIR , , "CFS Seismic Evaluation of Bending Frames Made of Cold-rolled Sections" , Msc , 21 October2013
4- MOHAMMADAMIN SHAHMOHAMMADI , MOHAMMAD ZAMAN KABIR , , "considering the stability of FGM spherical shells under external pressure and thermal changes" , Msc , 20 October2013
5- SHOHREH ALEDINI , MOHAMMAD ZAMAN KABIR , , "Assessment Of Seismic Rehabilitation Bending RC Frames Retrofitted Using FRP Fabrics" , Msc , 09 October2013
6- ARASH ASKARI , MOHAMMAD ZAMAN KABIR , , "Investigation on bucking modes of thin-walled cold-formed steel compound sections considering residual stresses" , Msc , 28 January2013
7- MEHDI PARVIZI , MOHAMMAD ZAMAN KABIR , , "Lateral-torsional bucking analysis of cold-formed open sections underin-plain loading, considering residual stress" , Msc , 23 October2012
8- FARHAD SALEHI , MOHAMMAD ZAMAN KABIR , ,ALIREZA RAHAI , "modeling of crack propagation in RC slender piers retrofitted with FRP under simultaneous axial, shear and flexural forces" , Msc , 20 October2012
9- MEHDI MOTALEB , MOHAMMAD ZAMAN KABIR , , "Repair of demaged steel-concrete composite girders using CFRP plates " , Msc , 20 October2012
10- MEHDI TAHERZADEH ESFAHANI , MOHAMMAD ZAMAN KABIR , ,HAMID REZA OVESY , "Buckling of initialy delaminated composite beams" , Msc , 23 September2012
11- ATA HOJATKASHANI , MOHAMMAD ZAMAN KABIR , , "" , Phd , 19 June2012
12- MOSTAFA BAGHERIHAKELISHAMI , MOHAMMAD ZAMAN KABIR , , "Investigation on Behavior of LSF Panels with Steel Strap Bracing Under Cyclic Loading" , Msc , 28 February2012
13- HOSSEIN MOMENILARIMI , MOHAMMAD ZAMAN KABIR , , "Numerical Investigation of Interfacial Stresses in NSM Method of Shear Strengthening of RC Beams" , Msc , 25 February2012
14- ARSALAN KALALI , MOHAMMAD ZAMAN KABIR , , "Investigation of In-plane Nonlinear Dynamic Behavior of Perforated Unreinforced Brick Walls Strengthened with FRPs" , Phd , 19 July2011
15- HAMED ZAD MEHR , MOHAMMAD ZAMAN KABIR , , "Seismic retrofitting of slender RC columns using FRP fabric" , Msc , 15 March2011
16- HASSEIN KOLAHI , MOHAMMAD ZAMAN KABIR , , "retrofittingof masonry walls containing openung against out of plane load using FRP fabric" , Msc , 20 February2011
17- PARISA SHADAN , MOHAMMAD ZAMAN KABIR , , "Enhancing the seismic performance of 3D wall system on pilotis RC frame" , Msc , 14 February2011
18- ALIREZA ZOJAJI , MOHAMMAD ZAMAN KABIR , , "Strengthening of hollow and box section RC beam under torsion with FRP fabrics" , Msc , 13 February2011
19- AMAN KARAMLOU , MOHAMMAD ZAMAN KABIR , , "Seismic Performance of L-Shaped Wall to Wall Connections of ICF Panels" , Msc , 19 June2010
20- ?ALI EHSAN SEYF , MOHAMMAD ZAMAN KABIR , , "Lateral-Torsional buckling of Steel beam using FRP sheets" , Msc , 12 June2010
21- RAMIN MAHMOODZADE ANDVARI , MOHAMMAD ZAMAN KABIR , , "Seismic Performance of Steel Shear Wall under Cyclic & Transient Loading" , Msc , 06 March2009
22- ALIREZA NAZARI , MOHAMMAD ZAMAN KABIR , , "The buckling of cracked aluminium cylindrical shells stiffened with FRP patch" , Msc , 04 February2009
23- MAJID TAHERI , MOHAMMAD ZAMAN KABIR , ,SHAPOUR TAHOUNI , "seismic analysis of 3D walls with opening under cyclic & transient loading" , Msc , 02 February2009
24- HAMZEH KHAMEHCHIAN , MOHAMMAD ZAMAN KABIR , , "Numerical Investigation of Cyclic Performance of Retrofitted Beam Column joint by External FRP fabric " , Msc , 01 February2009
25- ALI EHSANBAKHSH , MOHAMMAD ZAMAN KABIR , , "Effects of opening on the post- buckling of thin walled cylindrical composite shells subjected to axial load" , Msc , 13 December2008
26- ERFAN SHAFEI , MOHAMMAD ZAMAN KABIR , , "Analytical Study of Externally Retrofitted RC Beams by FRP under Low Velocity Impact " , Msc , 21 September2008
27- SHAHRAM EBRAHIMI , MOHAMMAD ZAMAN KABIR , ,ABOLGHASSEM KERAMATI , "Numerical buckling analysis of thin-walled cold-form girder section with corrugated webs under bending and shear loading" , Msc , 26 May2008
28- MOHSEN ESHAGHIAN , MOHAMMAD ZAMAN KABIR , , "" , Msc , 16 March2008
29- AMIR HOMAYOON KOSARIEH , MOHAMMAD ZAMAN KABIR , ,ALIREZA RAHAI , "INELASTIC SEISMIC RESPONSE OF PRECAST 3D WALL STRUCTURES WITH DISCONTINUOUS SHEAR WALLS SUPPORTED ON FRAMES" , Msc , 05 March2008
30- HOSSEIN GHAEDNIA , MOHAMMAD ZAMAN KABIR , ,ALIREZA RAHAI , "FLEXURAL AND SHEAR PERFORMANCE OF ONE AND TWO WAYS CONCRETE SLABS UPGRADING WITH FRP FABRICS" , Msc , 05 March2008
31- HAMID YADOLLAHI OMRAN , MOHAMMAD ZAMAN KABIR , , "STUDY OF NEAR SURFACE MOUNTED (NSM) TECHNIQUE FOR STRENGTHENING OF RC BEANS USING CFRP STRIPS" , Msc , 24 February2008
32- ALI MANSOORI , MOHAMMAD ZAMAN KABIR , ,ABOLGHASSEM KERAMATI , "BEHAVIOR AND ANALYSIS OF FRP WRAPPED CONCRETE COLUMNS UNDER ECCENTRIC LOADING" , Msc , 23 February2008
33- MAJID SAFEHIAN , MOHAMMAD ZAMAN KABIR , ,SHAPOUR TAHOUNI , "SEISMIC PERFORMANCE OF UPGRADED RC FRMES USING PREFABRICATED LIGHTWEIGHT SANDWICH PANELS" , Msc , 06 February2008
34- MOHAMMAD GHOLAMI , MOHAMMAD ZAMAN KABIR , ,VAHID LOTFI , "STRESS AND FAILURE ANALYSIS OF PIN-LOADED HOLE ANISOTROIC PLATE UNDER IN PLANE LOADING" , Msc , 22 September2007
35- OMID REZAYFAR , MOHAMMAD ZAMAN KABIR , , "" , Phd , 04 July2007
36- AMIR ABRISHAM FOROOSHAN , MOHAMMAD ZAMAN KABIR , , "" , Msc , 18 April2007
37- IMAN AHMADI , MOHAMMAD ZAMAN KABIR , , "" , Msc , 24 February2007
38- MOSTAFA ETEMAD SHAFEE , MOHAMMAD ZAMAN KABIR , , "" , Msc , 13 January2007
39- AMIR TEHRANIAN , MOHAMMAD ZAMAN KABIR , ,FARAMARZ KHOSHNUDIAN , "" , Msc , 10 January2007
40- MAJID FARRIN , MOHAMMAD ZAMAN KABIR , , "" , Msc , 13 December2006
41- MASOOD TARIBAKHSH , MOHAMMAD ZAMAN KABIR , , "" , Msc , 04 November2006
42- ARASH ROJHANI SHIRAZI , MOHAMMAD ZAMAN KABIR , , "" , Msc , 24 July2006
43- REZA SHAHMORADI , MOHAMMAD ZAMAN KABIR , , "" , Msc , 15 March2006
44- ATA HOJATKASHANI , MOHAMMAD ZAMAN KABIR , , "" , Msc , 19 February2006
45- DAVOOD POORVEIS , MOHAMMAD ZAMAN KABIR , , "stability analysis of orthogonally stiffened laminated composite cylindrical shells subjected to combined loading" , Phd , 24 September2005
46- REZA KEIKHA , EGHBAL SHAKERI , ,MOHAMMAD ZAMAN KABIR , "" , Msc , 21 May2005
47- YAHYA NASSIRA , ALIREZA RAHAI , ,MOHAMMAD ZAMAN KABIR , "" , Msc , 06 February2005
48- MOGTABA NAJAFI , MOHAMMAD ZAMAN KABIR , , "" , Msc , 20 October2004
49- AMIR RISMANDOUST , MOHAMMAD ZAMAN KABIR , , "" , Msc , 12 July2004
50- ALI REZA KARIMI KHOSHHAL , MOHAMMAD ZAMAN KABIR , , "" , Msc , 03 April2004
51- REZA VASHEGHANI FARAHANI , MOHAMMAD ZAMAN KABIR , , "" , Msc , 28 February2004
52- SAEED KIANUSH , MOHAMMAD ZAMAN KABIR , , "" , Msc , 13 October2003
53- OMID REZAYFAR , MOHAMMAD ZAMAN KABIR , , "" , Msc , 22 September2003
54- SALMAN SAFARI , MOHAMMAD ZAMAN KABIR , , "" , Msc , 10 March2003
55- ALIREZA JAHANPOUR , MOHAMMAD ZAMAN KABIR , , "" , Msc , 08 March2003
56- HOSSEIN JAFARZADEH , MOHAMMAD ZAMAN KABIR , , "" , Msc , 01 January2003
57- SALAHEDIN PARASTEGARY , MOHAMMAD ZAMAN KABIR , , "" , Msc , 25 February2002
58- SEYESDHAMID SAJADI , MOHAMMAD ZAMAN KABIR , , "" , Msc , 03 February2002
59- BEHZAD SAFARIAN , MOHAMMAD ZAMAN KABIR , , "" , Msc , 21 January2002
60- HOSSEIN NAGHAEI , MOHAMMAD ZAMAN KABIR , , "" , Msc , 28 November2001
61- ASGAR RAHPEYMA , MOHAMMAD ZAMAN KABIR , , "" , Msc , 17 November2001
62- AHMADREZA JAEFARI , MOHAMMAD ZAMAN KABIR , , "" , Msc , 13 March2001
63- AFSHIN MOSLEHITABAR , MOHAMMAD ZAMAN KABIR , , "" , Msc , 01 December1999
64- AFSHIN BAGERZADEH , MOHAMMAD ZAMAN KABIR , , "" , Msc , 21 November1999
65- SAYYAD HOSSEIN MOOSAVI , MOHAMMAD ZAMAN KABIR , , "" , Msc , 17 November1999
66- SAMAN HEDJAZI , MOHAMMAD ZAMAN KABIR , , "" , Msc , 22 September1999
67- MOHAMMD ALI POURAKGTARIEH , MOHAMMAD ZAMAN KABIR , , "" , Msc , 16 January1999


Courses

MECHANICS OF COMPOSITE MATERIALS(FALL_2014)

* Terminology, General Concept, Typical Fiber and Matrix properties, Stiffness relations for single layer * Calculating of Elastic Stiffness in reference directions, Strength analysis of single layer, Max. principle stress and strain * Constitutions of laminates, Strength criterion in laminates , First-Ply-Failure * Constitutions of laminates, Strength criterion in laminates , First-Ply-Failure, * . Last-Ply-Failure, Micromechanics in composite materials, predicting of elastic constants * Predicting of composite strength in micromechanics analysis, Thermal stress * . Thermal residual stresses in laminates, Equilibrium requirement * . Laminate plates under flexure, Buckling of laminated plates, Free Vibration of laminates * Mechanics of thin walled composite sections under axial and bending * . Mechanics of thin walled composite sections under shear and torsional loading * . Stress concentration around hole in composite plates, Interfacial stresses * Three dimensional Elasticity in anisotropic media * . Standard test method in composites for finding fundamental constants * . Strengthening of RC structure using FRP, bonding models, flexural strengthening of RC beams * Shear strengthening of beams, confining of RC columns using FRP laminates, Seismic retrofitting of RC structures * Clip presentation, factory visit
STRENGTH OF MATERIALS 1(FALL_2014)
* General aims of this course, terminology, the concept of stress, normal and shear, examples * types of stress, bearing stress, stress components on obliged surface, ultimate and design stress, factor of safety * Strain, engineering and exact definition, stress-strain relations, axial deformation, examples * Stress analysis in indeterminate rods, thermal stress in rods, examples * Inelastic analysis of axial stress, residual stress and deformation, examples * Torsion of circular section, Stress and deformation analysis * Torsion in indeterminate shafts, Stress concentration in torsion * Inelastic analysis in Torsion, Torsion of non-circular sections, Torsion of thin walled sections * Flexural loading, strain and stress analysis in bending, Bending moment and curvature relations * Inelastic bending, bending under combined axial and bending forces * eccentric loading, unsymmetric bending * transverse loading, shear stress in section * shear in thin walled sections, shear center * Stress under combined loading, non symmetric shear loading
STRENGTH OF MATERIALS 1(FALL_2014)
* General aims of this course, terminology, the concept of stress, normal and shear, examples * types of stress, bearing stress, stress components on obliged surface, ultimate and design stress, factor of safety * Strain, engineering and exact definition, stress-strain relations, axial deformation, examples * Stress analysis in indeterminate rods, thermal stress in rods, examples * Inelastic analysis of axial stress, residual stress and deformation, examples * Torsion of circular section, Stress and deformation analysis * Torsion in indeterminate shafts, Stress concentration in torsion * Inelastic analysis in Torsion, Torsion of non-circular sections, Torsion of thin walled sections * Flexural loading, strain and stress analysis in bending, Bending moment and curvature relations * Inelastic bending, bending under combined axial and bending forces * eccentric loading, unsymmetric bending * transverse loading, shear stress in section * shear in thin walled sections, shear center * Stress under combined loading, non symmetric shear loading
Theory of Elasticity(FALL_2014)
seminar(SPRING_2014)
* Selecting of research topic * How to collect the research materials? search methods on data banks (University intranet, internet)? technical keywords and finding the papers? Classification of search on types of references (books, conference proceeding, national and international Journals)? reading skills * -Processing of provided information * Writing skills? General Layout of thesis? Abstract? Introduction? Chapters? Developing paragraphs, formulas, figures, titles and subtitles, chapter numbering? Last chapter, Discussion and conclusion? References? Appendices? Learning graphical soft wares (AutoCAD, Photo shop, Excel, Word) * Technics for oral presentation? Outline of presentation? Preparation of slides in power-point software? Proficiency of speech in public (punctuation, watching the audiences, appropriate level of volume, moving hands, …) * - References1-Kabir, M. Z. and Shafei E. (2013)” How to write an scientific essay”, Iranian Journal, Vol. 2, No.4, pp.223-228
STRENGTH OF MATERIALS 1(SPRING_2014)
* General aims of this course, terminology, the concept of stress, normal and shear, examples * types of stress, bearing stress, stress components on obliged surface, ultimate and design stress, factor of safety * Strain, engineering and exact definition, stress-strain relations, axial deformation, examples * Stress analysis in indeterminate rods, thermal stress in rods, examples * Inelastic analysis of axial stress, residual stress and deformation, examples * Torsion of circular section, Stress and deformation analysis * Torsion in indeterminate shafts, Stress concentration in torsion * Inelastic analysis in Torsion, Torsion of non-circular sections, Torsion of thin walled sections * Flexural loading, strain and stress analysis in bending, Bending moment and curvature relations * Inelastic bending, bending under combined axial and bending forces * eccentric loading, unsymmetric bending * transverse loading, shear stress in section * shear in thin walled sections, shear center * Stress under combined loading, non symmetric shear loading
STRUCTURAL STABILITY(SPRING_2014)
* Introduction: The basic concept of linear buckling and stability, classification of elastic systems, (conservatives and non-conservatives) * Stability of conservative systems: Minimum potential energy, mathematical manipulation of single degree of freedom, n degree of freedom, continuous systems, orthogonal relations, some examples * Approximate methods and their application in stability problems: The Rayleigh-Ritz method, column with one elastic support, column on elastic foundation, Galerkin method. * Elastic and non elastic buckling of columns: Euler formula, effective length, double module and tangent theory, columns with initial imperfections, columns with various end conditions. * Buckling of beam columns: Introduction and basic concepts, manipulation of stability equations of beam columns, Intercation curves, the effect of boundary conditions, non elastic buckling of beam columns. * Lateral Torsional buckling of beams: Lateral torsional buckling of thin walled open section columns with general cross section( e.g. section with single or double axis of symmetry, section with no axis of symmetry), lateral torsional buckling of beams, warping effect on buckling, buckling load of beams under( end moments, lateral point load, lateral distributed loads), non elstic buckling of beams in lateral stability, the application of theory in design codes * Buckling of elastic rectangular frames: The method of slope-deflection on buckling of frames, general analysis of static perturbation technique, examples ( continuous two span beam axial load, two bar frame, portal frame with side sway * Buckling of flat plates: Von-Karman theory for flat plates, plates under edge compression and shear, linearization of Von-Karman theory; plate under edge compression only, shear buckling of plates, buckling of plates in-plane bending, collection of graphs for various edge and loading conditions, practical problems, multi-web beams * Buckling of thin walled cylindrical shells * Post buckling of elastic systems: general analysis of one degree of freedom system (equilibrium, stability, energy surfaces, snap-through, limit point, instability, asymmetric bifurcation, symmetric bifurcation), examples; shallow arch (one degree of freedom, bifurcation modelExamples on multi degree of freedom, shallow shell (2 degree of freedom) * Post buckling of rectangular plates: Von Karman theory of large deflection, Reyleigh Ritz solution for s.s. rectangular plates in uniaxial loading, in-plane plate stiffness in post buckling region, stress distribution after buckling, effective width concept. * Interactive buckling: simple (Vondeneut) column, reduced Euler load, effect of local plate buckling on Euler buckling, optimization of material usage, effect of imperfection, thin walled beam in bending, effective width formulae for strength calculations.
Structures Stability(SPRING_2014)
* Introduction: The basic concept of linear buckling and stability, classification of elastic systems, (conservatives and non-conservatives) * Stability of conservative systems: Minimum potential energy, mathematical manipulation of single degree of freedom, n degree of freedom, continuous systems, orthogonal relations, * Approximate methods and their application in stability problems: The Rayleigh-Ritz method, column with one elastic support, column on elastic foundation, Galerkin method. * Elastic and non elastic buckling of columns: Euler formula, effective length, double module and tangent theory, columns with initial imperfections, columns with various end conditions. * Buckling of beam columns: Introduction and basic concepts, manipulation of stability equations of beam columns, Intercation curves, the effect of boundelastic buckling of beam columns boundary conditions, non * Lateral Torsional buckling of beams: Lateral torsional buckling of thin walled open section columns with general cross section( e.g. section with single or double axis of symmetry, section with no axis of symmetry), lateral torsional buckling of beams, warping effect on buckling, buckling load of beams under( end moments, lateral point load, lateral distributed loads), non elstic buckling of beams in lateral stability, the application of theory in design codes * Buckling of elastic rectangular frames: The method of slope-deflection on buckling of frames, general analysis of static perturbation technique, examples ( continuous two span beam axial load, two bar frame, portal frame with side sway * Buckling of flat plates: Von-Karman theory for flat plates, plates under edge compression and shear, linearization of Von-Karman theory; plate under edge compression only, shear buckling of plates, buckling of plates in-plane bending, collection of graphs for various edge and loading conditions, practical problems, multi-web beams * Buckling of thin walled cylindrical shells * Post buckling of elastic systems: general analysis of one degree of freedom system (equilibrium, stability, energy surfaces, snap-through, limit point, instability, asymmetric bifurcation, symmetric bifurcation), examples; shallow arch (one degree of freedom, bifurcation modelExamples on multi degree of freedom, shallow shell (2 degree of freedom) * Post buckling of rectangular plates: Von Karman theory of large deflection, Reyleigh Ritz solution for s.s. rectangular plates in uniaxial loading, in-plane plate stiffness in post buckling region, stress distribution after buckling, effective width concept. * Interactive buckling: simple (Vondeneut) column, reduced Euler load, effect of local plate buckling on Euler buckling, optimization of material usage, effect of imperfection, thin walled beam in bending, effective width formulae for strength calculations.
MECHANICS OF COMPOSITE MATERIALS(FALL_2013)
* Terminology, General Concept, Typical Fiber and Matrix properties, Stiffness relations for single layer * Calculating of Elastic Stiffness in reference directions, Strength analysis of single layer, Max. principle stress and strain * Constitutions of laminates, Strength criterion in laminates , First-Ply-Failure * Constitutions of laminates, Strength criterion in laminates , First-Ply-Failure, * . Last-Ply-Failure, Micromechanics in composite materials, predicting of elastic constants * Predicting of composite strength in micromechanics analysis, Thermal stress * . Thermal residual stresses in laminates, Equilibrium requirement * . Laminate plates under flexure, Buckling of laminated plates, Free Vibration of laminates * Mechanics of thin walled composite sections under axial and bending * . Mechanics of thin walled composite sections under shear and torsional loading * . Stress concentration around hole in composite plates, Interfacial stresses * Three dimensional Elasticity in anisotropic media * . Standard test method in composites for finding fundamental constants * . Strengthening of RC structure using FRP, bonding models, flexural strengthening of RC beams * Shear strengthening of beams, confining of RC columns using FRP laminates, Seismic retrofitting of RC structures * Clip presentation, factory visit
STRENGTH OF MATERIALS 1(FALL_2013)
* General aims of this course, terminology, the concept of stress, normal and shear, examples * types of stress, bearing stress, stress components on obliged surface, ultimate and design stress, factor of safety * Strain, engineering and exact definition, stress-strain relations, axial deformation, examples * Stress analysis in indeterminate rods, thermal stress in rods, examples * Inelastic analysis of axial stress, residual stress and deformation, examples * Torsion of circular section, Stress and deformation analysis * Torsion in indeterminate shafts, Stress concentration in torsion * Inelastic analysis in Torsion, Torsion of non-circular sections, Torsion of thin walled sections * Flexural loading, strain and stress analysis in bending, Bending moment and curvature relations * Inelastic bending, bending under combined axial and bending forces * eccentric loading, unsymmetric bending * transverse loading, shear stress in section * shear in thin walled sections, shear center * Stress under combined loading, non symmetric shear loading
Theory of Elasticity & Plasticity(FALL_2013)
OPTIMIZATION OF STRUCTURS(SPRING_2013)
* Part One: Historical Review:Earlier Optimization, Minimum Weight, Linear Programming Application, Optimality Criteria Methods, Mathematical Programming Methods, Generalized Optimality Criteria, Discrete Optimization, Shape Optimization, Software Packages * Problem Formulation, Component and system level optimization * classical optimization; differential calculus, Lagrange multipliers, calculus of variations * Linear Programming formulation, Simplex method, sequential linear programming, * Unconstrained optimization (Direct search methods: univariate search, conjugate directions, * Gradient methods: steepest descent, conjugate gradients, Newton methods: Newton-Raphson, Variable-Metric * Constraint optimizationKun-Tucker conditions, Gradient Projection methods, feasible directions methods, penalty-function methods: Exterior method, interior method, Gauss-Newton method * Part Four: Approximation ConceptsBasic concepts, Sensitivity Analysis (stress and Displacement sensitivities, Pseudo-load and virtual load methods, sensitivity of vibration frequencies), variable selection, Constraint approximations (conservatives and hybrid approximations), The synthesis process, * The Dual method, Discrete variable optimization, Optimality Criteria method (Intuitive methods, rigorous methods), shape optimal design * Part Five: Genetic AlgorithmsModeling the evolutionary process (artificial life, evolution strategies), Application of a genetic algorithm (coding a decision variable, evaluating fitness, genetic operations, one-generation operation of GA), Genetic algorithms for engineering design (trussed-beam roof strictures, cable-stayed bridge, Michell truss, composite laminate plate
Seminar(SPRING_2013)
STATIC & STRENGTH OF MATERIAL(SPRING_2013)
* Introduction, Fundamental concepts and principles, Systems of units, Newton laws * Statics of a particles, forces in a plane, resultant of several concurrent forces, rectangular components of a force, ,equilibrium equations in a plane, forces in space, rectangular components of a force in space, :resultant of several components in space, equilibrium of a particle in space * Rigid bodies, equivalent systems of forces, principle of transmissibility of forces,vector product of forces, moment of a force about a point, rectangular components of the moment of a force, moment of a force about a given axis, equivalent system of forces and moments * , Equilibrium of Rigid Bodies: free body diagram, equilibrium in two dimensions, statically indeterminate reactions,equilibrium in three dimensions, * Distributed forces: centroids and centers of gravity, area and lines, the first moment of areas and lines, Theorems of Pappus-Guldinus, centroids of three dimensional mass * Analysis of structures: two dimensional trusses, beams the method of truss analysis, internal forces of plane beams and frames * Part two: strength of materials: definition of stress, stress tansor, components of stress, bearing stress, factor of safety, ultimate and allowable atress * Stress in rods, strain-stress relations, Hooks law, elastic axial deformation in rods, thermal stress, indeterminate analysis of rods * Torsion in circular sections, solid and hollow sections, shear stress under torsion in circular section, twist angle, torsion in indeterminate shafts * Bending of beams, flexural stress in beams, deformation and slope in beams under bending using differential equation of deformed function, shear and bending stresses in beams, indeterminate problems in bending * combined stresses in structural members, shear and normal stresses in a point, stress in pressure vessels under internal pressure * Principles stresses using Mohre circle method
STRENGTH OF MATERIALS 1(SPRING_2013)
* General aims of this course, terminology, the concept of stress, normal and shear, examples * types of stress, bearing stress, stress components on obliged surface, ultimate and design stress, factor of safety * Strain, engineering and exact definition, stress-strain relations, axial deformation, examples * Stress analysis in indeterminate rods, thermal stress in rods, examples * Inelastic analysis of axial stress, residual stress and deformation, examples * Torsion of circular section, Stress and deformation analysis * Torsion in indeterminate shafts, Stress concentration in torsion * Inelastic analysis in Torsion, Torsion of non-circular sections, Torsion of thin walled sections * Flexural loading, strain and stress analysis in bending, Bending moment and curvature relations * Inelastic bending, bending under combined axial and bending forces * eccentric loading, unsymmetric bending * transverse loading, shear stress in section * shear in thin walled sections, shear center * Stress under combined loading, non symmetric shear loading
STRUCTURAL STABILITY(SPRING_2013)
* Introduction: The basic concept of linear buckling and stability, classification of elastic systems, (conservatives and non-conservatives) * Stability of conservative systems: Minimum potential energy, mathematical manipulation of single degree of freedom, n degree of freedom, continuous systems, orthogonal relations, some examples * Approximate methods and their application in stability problems: The Rayleigh-Ritz method, column with one elastic support, column on elastic foundation, Galerkin method. * Elastic and non elastic buckling of columns: Euler formula, effective length, double module and tangent theory, columns with initial imperfections, columns with various end conditions. * Buckling of beam columns: Introduction and basic concepts, manipulation of stability equations of beam columns, Intercation curves, the effect of boundary conditions, non elastic buckling of beam columns. * Lateral Torsional buckling of beams: Lateral torsional buckling of thin walled open section columns with general cross section( e.g. section with single or double axis of symmetry, section with no axis of symmetry), lateral torsional buckling of beams, warping effect on buckling, buckling load of beams under( end moments, lateral point load, lateral distributed loads), non elstic buckling of beams in lateral stability, the application of theory in design codes * Buckling of elastic rectangular frames: The method of slope-deflection on buckling of frames, general analysis of static perturbation technique, examples ( continuous two span beam axial load, two bar frame, portal frame with side sway * Buckling of flat plates: Von-Karman theory for flat plates, plates under edge compression and shear, linearization of Von-Karman theory; plate under edge compression only, shear buckling of plates, buckling of plates in-plane bending, collection of graphs for various edge and loading conditions, practical problems, multi-web beams * Buckling of thin walled cylindrical shells * Post buckling of elastic systems: general analysis of one degree of freedom system (equilibrium, stability, energy surfaces, snap-through, limit point, instability, asymmetric bifurcation, symmetric bifurcation), examples; shallow arch (one degree of freedom, bifurcation modelExamples on multi degree of freedom, shallow shell (2 degree of freedom) * Post buckling of rectangular plates: Von Karman theory of large deflection, Reyleigh Ritz solution for s.s. rectangular plates in uniaxial loading, in-plane plate stiffness in post buckling region, stress distribution after buckling, effective width concept. * Interactive buckling: simple (Vondeneut) column, reduced Euler load, effect of local plate buckling on Euler buckling, optimization of material usage, effect of imperfection, thin walled beam in bending, effective width formulae for strength calculations.
Structural Stability(SPRING_2013)


Educational Records

1991-1995, Ph. D. , University of Waterloo, Waterloo, Canada
1987-1989, M. Sc. , Amikabir University of Technology, Iran 
1983-1987, B. Sc. , AmirKabir University of Technology, Iran


Employment and Teaching

(Teaching)

Structural Stability
Mechanics of Composite Materials
Structural Optimization
Structural Analysis I
Mechanics of Materials I
Mechanics of Materials II
Statics

 


Scientific Societies

-


Award

-


Mangement/Administration Jobs

Civil Engineering Department Undergraduate Chair 1997-1999


Civil Engineering Department, Graduate Officer 2001-2005


Contact

N0.424,Hafez Avenue,Amirkabir University
Email:mzkabir@aut.ac.ir
Tel,(021)6400243 & 64543016
Fax;(021)6414213